Floor Waterproofing Membrane is a durable roll-form sheet designed to protect interior subfloors from moisture before installing engineered wood and other floating floor systems. Installed directly over the subfloor, it creates a continuous barrier that helps prevent water ingress from spills, wet mopping, and incidental construction moisture reaching the substrate.
FloorArmor 500 is not a generic covering material—it is an engineered solution designed specifically for the challenges faced on active construction sites. Its high-density needle-punched structure provides a controlled cushioning effect that absorbs impact from tools, equipment, and foot traffic, significantly reducing the risk of cracks, chips, or surface stress. At the same time, the fabric forms a protective interface that prevents scratches and abrasions on polished marble and granite.
Unlike conventional protection sheets, FloorArmor 500™ delivers a dual-function performance. The dense fiber matrix not only cushions the surface but also actively absorbs water, slurry, and accidental spills generated during polishing, tiling, or finishing activities. This prevents liquid pooling and reduces the chances of staining or surface contamination. The result is a cleaner, safer working environment and a protected surface that remains intact throughout the project lifecycle.
| Property | Unit | Test Method | Spec | Result |
|---|---|---|---|---|
| Tensile Strength (MD/CD) | kN/m | ASTM D4595 | 15 | 16.29 / 17.38 |
| Elongation @ Break (MD/CD) | % | ASTM D4595 | >50 | 70 / 61 |
| Grab Strength (MD/CD) | N | ASTM D4632 | 900 | 953 / 1024 |
| Elongation @ Break (MD/CD) | % | ASTM D4632 | >60 | 71 / 66 |
| Trapezoidal Tear Strength (MD/CD) | N | ASTM D4533 | 400 | 433 / 459 |
| Static Puncture (CBR) | N | ASTM D6241 | 3200 | 3417 |
| UV Resistance @ 500 hrs | % | ASTM D4355 | 70 | 74.19 |
| Mass / Unit Area | g/m² | ASTM D5261 | 500 | 518 |
| Thickness @ 2 kPa | mm | ASTM D5199 | 3.8 | 4.1 |